6/3/2019 Stewart Electronics announces that ALC Lighting products will no longer be manufactured!
WE DO HAVE STOCK ON MOST ALC PARTS! At least for now! Original prices are greatly reduced (while they last). Quantity limits apply.
We recently learned that the principle semiconductors used in the manufacturing of our light switches are now OBSOLETE!
We advise those of you with ALC products installed in your homes to contact us to purchase some spares. Our light switches had less than a .01 percent failure rate. So, a few spares may last you for many years.
For the same reasons we will no longer be able to make repairs to your circuit boards.
CONSIDERING UPGRADING? For the past 25 years we have consulted on installs across North America. Our initial advice is free. Call us to discuss your home’s future.
We also have a decent stock of the recently obsolete HAI Omni controllers.
Founder – Stewart Electronics
Cell and Office 864-663-1517
Information below is for historical purposes only.
The part no. 364644-01 Home Lighting Controller provides high-speed, two-way communications with Stewart Electronics Advanced Lighting Control (ALC) switches and I/O Module. The Home Lighting Controller’s flexible interface and control features enable it to function as a standalone lighting system controller for basic convenience and security lighting applications. Alternatively, the Home Lighting Controller can interface to personal computers and automation system controllers to provide fully automated whole-house lighting control functions.
CONVENIENCE AND SECURITY LIGHTING APPLICATIONS
In a basic system installation, ALC 4-Button Scene Switches, Program Switches and 4-Button Keyfob RF remote controls provide an interface to the homeowner for control of lighting within a room, multiple rooms or even lights and appliances throughout the entire home. The Home Lighting Controller incorporates features that permit ALC Scene Switches, Program Switches and On-Q Keyfob RF Remote Controls to automatically learn the light level settings of ALC switches and I/O Module outputs throughout the home. By simply pressing and holding a button, the homeowner can program groups of lights set to any desired level. Subsequently, each time the switch button is pressed, all associated ALC switch and I/O Module outputs will automatically resume their programmed levels. The Home Lighting Controller provides programmable inputs and also accepts X10 power line carrier lighting commands to enable easy interfacing to any security system.